Note:
This device can work with Tuya APP and Smart Life APP.


This device can not work with Home Assistant.

This device is not bidirectional and cannot identify the current produced and consumed.


Inner diameter of the clamp: 1 cm

There cannot be both neutral wire and live wire in the clamp at the same time.

The formula for calculating AC power is :P = UI cosθ(cosθ≤1)， represents the power factor of the circuit. Only resistive loads, such as incandescent lamps, dryers, heaters, electric water heaters, etc., have a power factor equal to 1.

The minimum current displayed by the APP is 0.1A. If the measured current is less than 0.1A, the APP will display ‘Device shutdown’ and no data will be shown.

Specifications

In the APP It Can Display:

Hourly Elec. (KWh)

Today Elec. (KWh),

Monthly Elec. (KWh)

Yearly Elec. (KWh)

Current Ele(mA),

Current Power(W),

Current Voltage(V),

Total Ele(KWh)

Technical data:

Rated Voltage:100-240V AC 50/60Hz

Measurable Current Range: 0.2A - 80A

WiFi Frequency:2.4GHZ

Ambient Temperature Range:-10°C ~ 55°C

App Real Time Monitor Energy Consumed KWh. Voltage, Current, and Power, also can Monitor Device Working Status

Electricity Statistic

You can view hourly , daily , monthly, Yearly and total KWh Consumed in App.

Monitor Power Usage Percentage from App

You can set power on App, and monitor the power usage percentage.

The minimum current displayed by the APP is 0.1A. If the measured current is less than 0.1A, the APP will display ‘Device shutdown’ and no data will be shown.

Automation , It allows to make a Scene for this device working with other tuya devices

Set Automation for the Measured Device ,

For example, If Power or Current Is over the Value, then other tuya device starts to work .

Automation. It allows to make a scene when the device turn off, send a notification

Easy and Safe to Install

Non-Connect to be safe.